2083 A European Declaration of Independence

August 1, 2011

3.33 Related tactical equipment and miscellaneous

Filed under: Uncategorized — sitamnesty @ 21:10

Combat gear – base layers

Base layers include boots, gloves, boxer, socks and any “under armour” compression clothing you will want to use.


Let’s start with the boots; you need black urban assault boots (not camo or any long distance “forest boots”). The boots should facilitate the attachment of a spur/spike on the back of the boots in order to use as a weapon for anyone assaulting you from behind. Also, the boots should incorporate some anti-blunt-trauma material which will help you to withstand any gunshot hits you might suffer (the ballistic boot protector in combination with good boots will be optimal).

The following are examples of boots that will suit your needs:

ATAC Shield Boot 8” (511tactical.com)

I chose the XPRT Tactical Boot 8" Boot due to the fact that they didn’t have the above in my size. Both offer a “Shock Mitigation System” and has received the highest of ratings. Prices range from 130 to 180 USD. I bought mine from polimil.com, a great distributor with a wide range of products.



X-Socks Speed Metal or any other expensive high-tech sport socks available


Description: help cool your feet during a long, hot run with X-Sock’s Xitanit conductive technology. The X-Sock Speed Metal Running Sock incorporates heat-conducting fibers, air-conditioning airflow channels, and supportive blister-reducing bands to keep your feet supremely comfortable, mile after mile. It sounds really techy-and it is. You’ll also find that it makes a great difference.

Skins Compression gear

I would highly recommend Skins Long Sleeve Top and the Skins Compression Leggings

Top: http://www.polimil.co.uk/acatalog/Skins___Sport_Long_Sleeve_Crew_Neck_T_Shirt__49_89.html

Leggings: http://www.polimil.co.uk/acatalog/Skins_Sport_Compression_Leggings__58_95.html

Benefits with Skins compression gear:

Will enhance your performance in training and recovery and give you an edge over your opponents (SWAT and regular system protectors).

They enhance circulation from engineered gradient compression which assists in reducing lactic acid build-up. A precision fit (choose your size from their size chart) based on your body mass index algorithm. Focuses muscle power and dramatically reduces muscle vibration. Moisture management wicking draws moisture away from your skin keeping you dry. Optimises your body temperature in warm or cool conditions. The top changes the shape of the diaphragm and encourages better posture which acts as a respiratory aid and improves performance. During aerobic activity where muscles need the body to process more oxygen a Skins top will help the wearer to breathe into the upper chest cavity and effectively take larger breaths.

Long sleeve top and leggings costs from 135 -180 Euro.

Assault Gloves

Hatch Operator Tactical Gloves SOG http://www.hatch-corp.com/detail.aspx?pid=SOG-600/650/700/750/800

Designed by and specifically for military use, this glove allows you to perform with surgical precision. The ergonomic fit and tactile sensation found in these gloves are unmatched.

  • Constructed of goatskin leather palms and sewn with abrasion, cut and heat-resistant nylon thread

  • Goatskin provides superior abrasion and tear resistance over cowhide or sheepskin, yet offers a comparable thickness for comfort and durability

  • KEVLAR® construction provides cut resistance, heat, and flash protection

  • Cut-ring stitching allows optional removal of the index finger for trigger control without unraveling the remaining edge

Defensive spikes

Boot spike

Black & Decker X61501 13 mm Countersink Bit


I successfully attatched the following “spike” on the backside, using a size 5 drill (the spike attachment pin is size 5,3 so it was a perfect match.

Tepes Revenge – Defensive Steel Impaler

The name is taken from Romanias most famous historical Crusader, Vlad Tepes, who impaled tens of thousands of Muslim invaders in the Balkans. The following defensive melee weapon is inexpensive and quite easy to create and is especially designed for one-man-cells where there is a high operational risk of being assaulted from behind or from one of the sides. The stationary defensive spikes primary function is to work as a deterrent, in order to discourage anyone from assault you. However, should someone choose to attack you from behind, he will most likely try to lock your arms in a standard “locking manouvre”. With one or more Tepes Revenge attached to your back vest you can easily impale and injure the attacker with only a little motion required from your end. The likelyhood of successful impaling is high as Tepes Revenge consists of 4 blades – 2 bent at 90 degrees and 2 bent at 130 degrees.

1-4. Staples letter opener/knife x 4 – 25 cm long with wooden handle/two holes, the 4 letter openers are bent as illustrated after removal of the wooden handles.

5. 2 x metal ruler or similarly shaped object

6. The fabric TR is attached to

7. 2 screws with nuts

8. A smaller spiked item made of iron and sold in larger hardware stores/house building stores. I don’t exactly remember what the this type of “nail” is called but it is used to fasten large wooden beams in house-building. This item can be fastened to your lower arms by drilling two holes through and fastening it to your lower-arm-protector with screws and nuts. Range of nail varies but aprox 15-20 cm is iptimal. For additional stabilization you may use circular plates with holes in them (they look like a coin with a size 5 hole in it.

Costs: 4 x letter openers/knives: 25 Euro, metal ruler: 12 Euro, screws with nuts: 19 Euro, 2 x iron beam nails: 5 Euro

End note: Tepes Revenge should be fastened on the upper side of your back to counter any conventional assault maneuvre from behind, where the attacker attempts to lock your arms or grab you around the neck. This can be very useful when your operation involves the assault on a crowd, where there is a chance that the situation can develop chaoticly and there are people on all sides. In a scenario like this, TR may prevent any surprices from behind. The knives should be sharpened and coloured black with a permanent marker. 8. Should be fastened on your lower arms so that you may defensively stab with them if assaulted if you are unable to use your primary or secondary fire arm. You may fasten TR to your combat vest. Just keep in mind that it will prevent your mobility in cases where you need to f example drive a car. An alternative for fastening TR to your combat vest is to attach it to a wide nylon strap, supported by f example a metal ruler and/or hook & loop material. In this case you will have to wear it as a belt, just on your chest/upper back. Simply take it off as you are entering a vehicle.

Caltrops – immediate vehicle-disabling road block

A caltrop (also known as caltrap, galtrop, cheval trap, galthrap, galtrap, calthrop, crow’s foot) is an anti-vehicle weapon made up of two or more sharp nails or spines arranged in such a manner that one of them always points upward from a stable base.

These ancient weapons may be thought of as the landmines of antiquity, useful to shape the battlefield and force the enemy into certain paths and approaches, or to provide a passive defense as part of a defensive works system. Caltrops served to slow down the advance of horses, war elephants, and human troops. They were said to be particularly effective against the soft feet of camels. In more modern times, caltrops are used against wheeled vehicles with or without pneumatic tires.

The best caltrops available against vehicles are hollow spikes which puncture self-sealing rubber tires. The hole in the center allows air to escape even if the other end of the tube is sealed by soft ground.

These caltrops can be ordered from the following supplier:


Paypal: supertek2007@hotmail.com

Sergio Anaya, Guadalajara Mexico

Prosperity Technologies, Inc.

Street Address: Privada San Carlos 1044

City: Zapopan

Province/State: Jalisco

Country/Region: Mexico

Zip: 45236

Telephone: 52-331-4875439

Mobile Phone: 3314875439

Prices vary from 3-5 USD per caltrop depending on the amount you order. Keep in mind that you will use approximately 10-20 caltrops to effectively create a vehicle-disabling roadblock.

Caltrops are very useful for certain missions where it is necessary to either escape (use on free-way to prevent pursuit), to block of roads or to cause havoc in situations where you want to prevent system protectors from pursuing you.

Usually, shipments by courier (fedex, UPS etc.) will have a higher chance of not being seized. The sellers are familiar with import restrictions and will usually mark the shipment with “metal handicrafts” or other vague descriptions. I ordered 60 caltrops.


LED police lights

These are used to mimic system protector vehicles. They are very useful for confusing system protectors/guards/civilians on f example your second target and thus prevent them from shooting at your car. The LED police lights should be used in combination with car magnets.


Car magnets

Car magnets are used to fasten logos etc on 1 – 4 sides of your car. You will often find it useful to print out (using a high quality colour printer) logos and glue them to the car magnets using plastic film. Very useful for certain missions. I ordered 12 in size 20 x 20 cm and created the necessary logos in photoshop, and using a high quality print shop abroad (obviously paying by cash).

Smoke grenades (signal smoke) and various gun/army related items

Smoke grenades are usually used when you need to escape a location and/or when you are pinned down. They can also work as distractions.


4GB AEE PD80 Mini DV DVR Camera

This extremely small and lightweight field camera is used to document your operation. 4 GB is equivalent to 2 hour of constant filming. Ive personally tested it and it works great. Some governments may seize the movie (after you are neutralized) and publish it while others may bury it or even destroy it to protect the multiculturalist ideology. The reason is that they may regard any documentation from the Justiciar Knight as a mockery of their system. On the other hand, they may actually release the film to the press censored or even uncensored. You may want to bring 2 memory chips and attempt to mail one of them, if possible. You place the memory chip in a pre-made envelope (with stamps and the address of a pre-selected news desk that is likely to publish it uncensored). The best option would of course be to upload the digital movie via high speed internet (your Iphone) to a distribution site at the end of your mission. Unfortunately though, uploading 1-2 GB would take at least 3-7 hours. Also, there is normally a 200MB-ish cap on email attatchments so sending the movie to 10-20 newsdesks is not yet an option due to technological limitations. This will off course change at some point in the future.

Sold on Ebay (Chinese producer)

Cost is 87 USD

Assault rig/molle rig

www.skdtac.com offers excellent chest rigs. However, there are numeours suppliers in all countries.

Various armour parts/gun parts

www.israeli-weapons.com offers a lot of equipment not normally found in European stores.

Gas mask

A gas mask is useful in situations where you are surrounded and flanked on all sides (f example inside a building) and you expect a SWAT team to strike against you. In most cases they will launch a CS strike (tear gas) 30 seconds before they ram the door and storm your position. With a gas mask and decent cover, you will be able to neutralize up to 5 system protectors before they manage to overwhelm you. SWAT teams have very little experience with professional freedom fighters and are usually used to criminals and gun desperados with little or no body armour, no insight and experience with SWAT tactics and little or no survival equipment.

You need a compact gasmask with minimal weight. You should consider buying a Soviet gas mask (GP-5) as they fit the description and costs less than 10 Euro. They made millions and have been dumping them on the market for years. Western gas masks with the similar specs costs 100 Euro +. There are several suppliers selling these and some are continuously listed on ebay. I have been unable to confirm whether the filter is specifically effective against SWAT CS gas, but Im pretty sure it offers decent protection based on the description of the filter (nuclear, biological, chemical protection).

Cost – 25 Euro incl shipping.

Keyword: soviet military gas mask


Blank patches – black

Used to place emblems or other logos (f example to mimic system protectors). Emblems/logos are printed, laminated and glued to the surface of the patches with adhesive double sided strips. You can order these patches with Velcro/hooks.

Cost for 4 patches (2 large, 2 small): 100 Euro

No minimum order):



Laser bore sights

Used to calibrate your weapon sight without firing your gun. Cartridge laser bore sights are inexpensive and relatively accurate. Weapon sight will still need fine tuning.


Garmin eTrex

An inexpensive way to generate coordinates for the location where you dug down your caches.

Cost: 50-80 Euro

Ballistic helmet with ballistic visor


Eotech Transverse XPS 2 Red Dot Sight / Non-NV

Cost: aprox 450 Euro



EOTech G23 FTS 3x Black Magnifier Gen II w/ Flip To Side Mount

Cost: aprox 500 Euro

Opticsplanet.com has an export restriction for this item so I bought it on ebay.

Money belt with secret pocket

Useful when traveling abroad and when you contact criminals individuals or networks (weapons acquisition). It limits the chances of being robbed.

Acquiring the appropriate drivers license

Class 1: Regular car up to small truck (up to 1,2 ton cargo load only!). Aprox cost for this license is 2000-3000 Euro depending on the various Western European countries.

Class 2: Medium truck up to 7,5 ton max weight (up to 2,5 ton cargo load only!). Aprox cost is 2250-3250 Euro in addition to the cost for the class 1 license.

Class 3: Large truck (up to 5-8 tons cargo load). Aprox cost is 2500-3500 Euro.

Tips: if you don’t have a license yet, you have to first take class 1 and then take class 3 (forget about class 2).

You should not drive around without a license as this will substantially increase the risk of apprehension and may cause a lot of problems. In addition, you will not be able to rent a truck from the rental companies without a valid driver’s license. You might think you are smart and buy a stolen truck (or steal one yourself). However, the added risk and costs involved will not weigh up for the alternative cost of getting your truck license the legal way. You should calculate aprox 2-3 months for the acquisition of a valid truck license if you already have the class 1 license. If you lack both you should estimate a 5-6 months acquisition time.

End note: as my cargo would be less than 1,2 tons per vehicle I disregarded upgrading my license and saved 4000 Euro.


Leave a Comment »

No comments yet.

RSS feed for comments on this post. TrackBack URI

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

Create a free website or blog at WordPress.com.

%d bloggers like this: